2014-2022 Dodge Ram 2500 Rear Adjustable Control Arms

2014-2022 Dodge Ram 2500 Rear Adjustable Control Arms

$896.00

SKU: AP-900-230

Great reasons to buy from us:

Top Notch Customer service!
Need help! Give us a call or message us.
Lifetime Warranty
Lifetime warranty on all Apoc products.

Fully adjustable from stock to 6" lift

Ram 2500 rear Apoc Adjustable control arms are designed just for the 2014 up Ram 2500; our bushings are specifically designed for Ram's extra wide mounting locations and large 20mm bolts. Our Bushing sleeves are 1.25" solid rod machined to accept the 20mm bolts leaving a 1/4" wall for adding strength.

Apoc Ram 2500 rear adjustable control arms are a significant upgrade from stock; factory controls arms work great with factory-sized tires and suspension. Once you go bigger, you need more robust and longer control arms to maintain correct handling. Apoc Ram 2500 rear control arms are built to allow proper rear pinion and driveshaft angles to ensure your u-joints are happy and control wheel hop under load. When adding any lift to a Ram, you change your driveline angles, which can create premature U-Joint failure and driveline vibrations; adjustable rear control arms will help reduce or eliminate these issues. Big tires and lifts look great, but don't sacrifice handling and reliability. Adjustable Controls arms are fully adjustable from stock to 6" of lift, so if you're just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.

Parts Included:

2 Upper Control Arms
2 Lower Control Arms
Top Quality Polyurethane Bushings
Heavy wall tubing
Bushing Ends DOM Tubing
Uses Factory Hardware
Grease Fitting For Each Bushing For Long Life

Install Time:

3-4 Hours
Basic hand tools
Jack and Jack stands

Install Instructions

Control Arm lengths

If upgrading from factory control arms, the length to the correct lift size is met to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if you are unsure, contact the lift kit manufacturer to verify your size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure proper alignment angles.