







2002-2020 Cadillac Escalade Adjustable Trailing Arms 3-6" Drop
2002–2020 Cadillac Escalade Notched Rear Adjustable Trailing Arms | 3–6" Drop
Build your lowered Escalade around clearance and adjustability. APOC Industries Notched Rear Adjustable Trailing Arms are designed for 3–6-inch drop applications, with CNC-machined notches in the upper arms to provide brake caliper bolt clearance. Adjustable arm lengths let you fine-tune rear axle positioning and pinion angle for your lowered suspension setup.
Made in the USA for 2002–2020 Cadillac Escalade applications with a 3–6-inch drop. Select the appropriate air ride or non-air ride configuration for your vehicle.
Features
- CNC-machined upper-arm notches: Provide brake caliper bolt clearance for lowered applications.
- Adjustable for 3–6-inch drops: Fine-tune arm length to suit your suspension setup.
- Pinion angle adjustment: Helps address driveline geometry changes after lowering. Correct setup is essential; vibration can have multiple causes.
- Solid 1.5-inch 1018 steel upper-arm bodies: Machined from solid bar rather than hollow tubing.
- Heavy-wall DOM tubing at the bushing ends: Provides precision bushing seats.
- Serviceable polyurethane bushings: Equipped with grease fittings for maintenance.
- Air ride and non-air ride options: Choose the configuration that matches your Escalade.
- Factory hardware compatible: An optional metric Class 10.9 hardware kit is also available.
- Made in the USA by APOC Industries.
What's Included
- Two upper rear trailing arms, notched for brake caliper bolt clearance.
- Two lower rear trailing arms.
- Pre-installed polyurethane bushings with grease fittings.
- Optional metric Class 10.9 hardware kit when selected.
Installation
- Estimated installation time: 3–4 hours.
- Tools: basic hand tools, jack, and jack stands.
- Set arm length for your suspension configuration before tightening the jam nuts.
- Check rear axle positioning, pinion angle, and component clearance after installation.
- Alignment is recommended after installation.
Vehicle Fitment
- 2002–2020 Cadillac Escalade.
- For suspension setups with a 3–6-inch drop.
- Air ride and non-air ride configurations available; select the appropriate option.
Important: These trailing arms are for lowering applications and do not lower the vehicle by themselves. Verify compatibility with your specific suspension configuration before ordering. For lifted applications, see the related control arm listing below.
Related Cadillac Escalade Suspension Parts
- 2002–2020 Cadillac Escalade Rear Adjustable Track Bar | 0–6" Drop — fine-tune side-to-side rear axle centering at your finished ride height. Check compatibility with your lowering kit and any required brackets.
- 1999–2019 Cadillac Escalade Rear Adjustable Trailing Arms | 0–3" Drop — an alternative for stock-height and smaller-drop builds, not an additional arm set for this 3–6-inch-drop kit.
- 1999–2014 Cadillac Escalade Rear Adjustable Control Arms | Stock to 6" Lift — an alternative for stock-height or lifted builds, not for this lowering application.
Review the linked product's year range and suspension requirements before ordering.
Visit the APOC Build Blog for build information and suspension resources.

