







2000–2020 Chevrolet Tahoe / Suburban Notched Rear Adjustable Trailing Arms | 3–6" Drop
2000–2020 Chevrolet Tahoe / Suburban Notched Rear Adjustable Trailing Arms | 3–6" Drop
Build your lowered Tahoe or Suburban around clearance and adjustability. APOC Industries Notched Rear Adjustable Trailing Arms provide an adjustable rear suspension setup for 2000–2020 Chevrolet Tahoe and Suburban models with a 3–6-inch drop. CNC-machined notches in the upper arms provide brake caliper bolt clearance, while adjustable arm lengths let you fine-tune rear axle positioning and pinion angle.
Dial in your stance with components built for your lowered setup, not a fixed-length compromise. Made in the USA by APOC Industries.
Features
- Notched upper arms: CNC-machined for brake caliper bolt clearance in lowering applications.
- Adjustable for 3–6-inch drops: Fine-tune arm length to suit your finished ride height.
- Pinion angle adjustment: Helps address rear driveline geometry changes after lowering. Proper setup is essential; vibration can have multiple causes.
- Solid 1.5-inch 1018 steel upper-arm bodies: Machined from solid bar rather than hollow tubing.
- Heavy-wall DOM tubing at the bushing ends: Provides precision bushing seats.
- Serviceable polyurethane bushings: Grease fittings allow routine maintenance.
- Air ride and non-air ride configurations: Select the option appropriate for your suspension setup.
- Factory hardware compatible: Optional metric Class 10.9 hardware kit available.
- Made in the USA.
What's Included
- Two upper rear trailing arms, notched for brake caliper bolt clearance.
- Two lower rear trailing arms.
- Pre-installed polyurethane bushings with grease fittings.
- Optional metric Class 10.9 hardware kit when selected.
Installation & Setup
- Estimated installation time: 3–4 hours.
- Tools: basic hand tools, jack, and jack stands.
- Set arm length to suit your lowering kit and suspension configuration before tightening the jam nuts.
- Check rear axle positioning, pinion angle, and component clearance through suspension travel.
- Alignment is recommended after installation.
Vehicle Fitment
- 2000–2020 Chevrolet Tahoe / Suburban.
- Designed for rear suspension setups with a 3–6-inch drop.
- Select the appropriate air ride or non-air ride configuration.
Important: These trailing arms do not lower the vehicle by themselves. Verify compatibility with your specific lowering kit and suspension configuration before ordering.
Complete Your Lowered Tahoe / Suburban Setup
2000–2020 Chevrolet Tahoe / Suburban Rear Adjustable Track Bar | 0–6" Drop — fine-tune side-to-side rear axle centering at your finished ride height. Check compatibility with your lowering kit and any required track bar brackets. The track bar is sold separately and does not replace brackets or other components required by your lowering kit.
Building a Lifted SUV Instead?
- 1999–2014 Tahoe / Suburban Rear Adjustable Trailing Arms | Stock to 6" Lift.
- 2014–2019 Tahoe / Suburban Rear Adjustable Trailing Arms | Stock to 6" Lift.
These lifted-application arms are alternatives, not additional arm sets for this lowering kit. Review the linked listing's year range and suspension requirements before ordering.
Explore the APOC Build Blog for build information and suspension resources.

