1994-2013 Dodge Ram 1500/ 2500 / 3500 4wd CNC Long Arm Conversion upgrade Kit

1994-2013 Dodge Ram 1500/ 2500 / 3500 4wd CNC Long Arm Conversion upgrade Kit

$1,987.00

SKU: AP-900-240- CNC UNCOATED

Finish

Please choose your year range.

Hardware Kit for Axle side with Cam bolt.

Great reasons to buy from us:

Top Notch Customer service!
Need help! Give us a call or message us.
Lifetime Warranty
Lifetime warranty on all Apoc products.

MUST HAVE AT LEAST 4 INCHES OF LIFT TO USE THIS LONG ARM upgrade KIT

Td to be used from 4" to 12" of lift.

No welding required minor drilling only.

The CNC Dodge Ram long kit allows adjustments to a caster angle and axle centering in fender wells. Adjustable control arms allow you to center the axle back to the stock location, which helps to reduce or stop tire rubbing when turning. The lower long control arms still utilize factory cam bolt style adjustments for easier alignment angle adjustments.

Apoc CNC Dodge Ram long-arm conversion upgrade kits are a significant upgrade from stock. Factory control arms work great with factory-sized tires and suspension, but you need more robust and longer control arms to maintain correct handling once you go bigger. Apoc long arm kits are built to support proper suspension and steering geometry to keep your truck feeling like stock or better. When adding any lift to a Dodge Ram, you change your caster angles, creating dangerous steering symptoms and making it hard to control on the road. Big tires and lifts look great but don't sacrifice handling and create a beast to keep on the road. Upgrade your control arms and drive with ease. Dodge Ram long arm kits are fully adjustable from 4 inches of lift to 12" of lift, so if you're starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.

Parts Included:

2 Upper Control Arms 1/4" steel box design
2 Lower Control Arms 1/4" steel box design
Longarm Conversion Bracket 1/4" steel
Top Quality Polyurethane Bushings
Bushing Ends DOM Tubing
Grease Fitting For Each Bushing For Long Life

Install Time:

6-8 Hours
Basic hand tools
Jack and Jack stands

Install Instructions

Control Arm lengths

If upgrading from factory control arms, e you set the length to the correct lift size to keep your steering geometry accurate. The larger the lift, the longer the control arms. Don't assume your lift size; if unsure, contact the lift kit manufacturer to verify your lift size. The Instructions will give you the measurements to set each control arm to match your lift; an alignment is recommended after installation to ensure all alignment angles are proper.