865-983-5004
Great reasons to buy from us:
-
Top Notch Customer service!
Need help! Give us a call or message us. -
Lifetime Warranty
Lifetime warranty on all Apoc products.
In need of some serious lift blocks for your Chevrolet GMC K10 or K20, Apoc Industries fabricated lift blocks have you covered. Our lift blocks offer insane strength but also look good doing it. Why lift your Chevy K10 or K20 with weak cast lift blocks when you can get the lift you want and look fabulous? Our fabricated lift blocks are made from 1/4" steel and pressure bent to add incredible strength and powder coated to look good for the long haul. Apoc's tapered design helps to reduce axle wrap when putting massive torque to the ground, along with an actual spring width block to match your leaf springs. We do not offer U bolts at this time.
Features
Sold as a Pair!
- 2.5" wide
- Heavy Duty Lift blocks fully welded and powder coated; U bolts not included.
- Made from 1/4" steel
- Multiple leaf spring centering pin mounting locations on centering axle in the fender.
- Pressure bent center support to increase strength
- Powder-coated satin black.
- Three degrees of taper to maintain proper pinion angle.
Installation
- Method to raise and support vehicle weight off of the rear axle.
- Large breaker bar and socket
- Torque Wrench
Optional Choices (does not come with unless added)
Anti Wrap u-bolts can be added to your blocks. The small hole on each corner of the lift block is for the anti wraps u-bolts; they add additional support by clamping around the leaf spring at the widest part of the block to help reduce the leaf spring from twisting.
3/4" Main U-bolts can also be added. These U-bolts will go over the Leaf spring alongside the lift blocks and under the axle to hold the rear axle to the truck. these will come in 14", 16", or 18", depending on the block size you choose.
Install Time
- 2.5 hours
- Easy to moderate install (rusty U-bolts can cause the removal of original U-bolts hard.)
- Install Instructions
| Shipping | This item ships to |
| Delivery | Estimated between THU Apr 17 and THU Apr 24. Will usually ship within 1 business day. |
Description
In need of some serious lift blocks for your Chevrolet GMC K10 or K20, Apoc Industries fabricated lift blocks have you covered. Our lift blocks offer insane strength but also look good doing it. Why lift your Chevy K10 or K20 with weak cast lift blocks when you can get the lift you want and look fabulous? Our fabricated lift blocks are made from 1/4" steel and pressure bent to add incredible strength and powder coated to look good for the long haul. Apoc's tapered design helps to reduce axle wrap when putting massive torque to the ground, along with an actual spring width block to match your leaf springs. We do not offer U bolts at this time.
Features
Sold as a Pair!
- 2.5" wide
- Heavy Duty Lift blocks fully welded and powder coated; U bolts not included.
- Made from 1/4" steel
- Multiple leaf spring centering pin mounting locations on centering axle in the fender.
- Pressure bent center support to increase strength
- Powder-coated satin black.
- Three degrees of taper to maintain proper pinion angle.
Installation
- Method to raise and support vehicle weight off of the rear axle.
- Large breaker bar and socket
- Torque Wrench
Optional Choices (does not come with unless added)
Anti Wrap u-bolts can be added to your blocks. The small hole on each corner of the lift block is for the anti wraps u-bolts; they add additional support by clamping around the leaf spring at the widest part of the block to help reduce the leaf spring from twisting.
3/4" Main U-bolts can also be added. These U-bolts will go over the Leaf spring alongside the lift blocks and under the axle to hold the rear axle to the truck. these will come in 14", 16", or 18", depending on the block size you choose.
Install Time
- 2.5 hours
- Easy to moderate install (rusty U-bolts can cause the removal of original U-bolts hard.)
- Install Instructions
Fitment
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between THU Apr 17 and THU Apr 24. Will usually ship within 1 business day. |
1988-1998 Chevrolet / GMC C1500 K1500 4, 6, 8 Inch Lift Blocks
Size/Anti-Wrap U-bolts/Main U-bolts
- 4 Inch / No / No
- 4 Inch / No / Yes
- 4 Inch / Yes / No
- 4 Inch / Yes / Yes
- 6 Inch / No / No
- 6 Inch / No / Yes
- 6 Inch / Yes / No
- 6 Inch / Yes / Yes
- 8 Inch / No / No
- 8 Inch / No / Yes
- 8 Inch / Yes / No
- 8 Inch / Yes / Yes
1994-2013 Dodge Ram 1500/ 2500 / 3500 4wd CNC Long Arm Conversion upgrade Kit
Finish/Please choose your year range./Hardware Kit for Axle side with Cam bolt.
- Raw Steel / 1994-1999 Dodge Ram 1500 / 2500 / 3500 / No Hardware Kit
- Raw Steel / 1994-1999 Dodge Ram 1500 / 2500 / 3500 / Yes add Hardware kit.
- Raw Steel / 2000-2002 Dodge Ram 1500 / 2500 / 3500 / No Hardware Kit
- Raw Steel / 2000-2002 Dodge Ram 1500 / 2500 / 3500 / Yes add Hardware kit.
- Raw Steel / 2003-2009 Dodge Ram 2500 / 3500 / No Hardware Kit
- Raw Steel / 2003-2009 Dodge Ram 2500 / 3500 / Yes add Hardware kit.
- Raw Steel / 2010-2013 Dodge Ram 2500 / 3500 / No Hardware Kit
- Raw Steel / 2010-2013 Dodge Ram 2500 / 3500 / Yes add Hardware kit.
- Satin black / 1994-1999 Dodge Ram 1500 / 2500 / 3500 / No Hardware Kit
- Satin black / 1994-1999 Dodge Ram 1500 / 2500 / 3500 / Yes add Hardware kit.
- Satin black / 2000-2002 Dodge Ram 1500 / 2500 / 3500 / No Hardware Kit
- Satin black / 2000-2002 Dodge Ram 1500 / 2500 / 3500 / Yes add Hardware kit.
- Satin black / 2003-2009 Dodge Ram 2500 / 3500 / No Hardware Kit
- Satin black / 2003-2009 Dodge Ram 2500 / 3500 / Yes add Hardware kit.
- Satin black / 2010-2013 Dodge Ram 2500 / 3500 / No Hardware Kit
- Satin black / 2010-2013 Dodge Ram 2500 / 3500 / Yes add Hardware kit.
1994-2013 Dodge Ram (Axle swap) Adjustable Control Arms
years
- 94-99 truck w/ 00-09 axle
- 94-99 truck w/ 2010-13 axle
- 00-09 truck w/ 94-99 axle
- 00-09 truck w/ 2010-13 axle
- 10-13 truck w/ 94-99 axle
- 10-13 truck w/ 00-09 axle
