2007-2014 Toyota FJ Crusier Rear Adjustable track Panhard bar
The adjustable track bar is a very important part for a lifted straight axle vehicle. The track bar is used to center your axle from left to right, if the length is not correct for your lift, you can create major alignment issues like dog tracking, brake pull, and the infamous death wobble. If you are running a pitman arm drop, you should also have a track bar drop bracket to keep angles correct and help with preventing the death wobble. When lifting your vehicle any more than 2” with out a track bar drop bracket, your track bar might need to be upgraded to an adjustable track bar to correct the alignment issues. If the track bar drop back is not dead on for your lift size, you might not be able to get the axle properly centered, that is when the adjustable track bar should be used with the drop bracket to correct the issue.
SPECS:
- 1.5" solid rod construction
- Adjustable for lifts up to 10"
- Precision machined bushing ends
- Rebuildable polyurethane bushings
- powder coated
- Made in the USA!
Install Time:
- 1-1.5 Hours
- Method to support the vehicle weight off of the axle.
- Basic hand tools and tape measure.