2003-2009 Dodge Ram 2500/3500 Bras de commande réglables

2003-2009 Dodge Ram 2500/3500 Bras de commande réglables

$553.00

SKU: AP-900-210

Hardware kit with cam bolts

Adjustable Track Bar

Kole H.

Besides the parts being out of stock for a week or so after I ordered as soon as they shipped they were at my front door in two days or less. Fitment and quality are amazing. Love how they look and feel on the truck. Cannot wait to add the track bar.

Eric

These are solid control arms. They’re well built and well designed. Also great value for the price.

Kyle Z.

When removing my factory control arms I was a big disappointed to find the bushings still perfectly intact but even over perfectly good oe control arms these bad boys majorly improved ride and handling on top of being a very well put together and cool looking part! Will definitely be recommending and ordering my track bar soon!

Brian R.

My original stock control arms were pretty beat. I had a shop put this in for me and do an alignment afterwards. Been on for a couple days now and the truck rides good. The arms themselves are nicely made and fact that they are adjustable and greaseable make them even better.

Kris M.

06 ram 3500 Leveling kit 35x12.5r17 -12mm Excellent fit, great quality

Ryley O'Malley

Purchased for my 07 2500, great build quality, fast shipping to Canada, great telephone support while placing my order , instructions included torque specs and basic install info. Fixed my geometry issues running 35”x12.5” 20” on fuel crush -18mm with a 3” tall springs

Mike Packard

I called and asked to have the bushings not pressed in so I could have them powdercoated but they arrived assembled. Slightly disappointed and not installed yet.

Christian Lee

Good quality control arms, they dont really tell you in the instructions how much grease to use, had to call them an ask. Also they no longer sell the adjustment tool for the jam nuts, which is kinda sad. An definitely get new cam bolts. I had to cut mine off they were so rusted. These are worth buying an I'd recommend them if you want to get new control arms.

Maxwell Hines

Adjustable control arms showed up really quickly and were packaged nicely! Installation following the instructions were super easy and they work great! Got an alignment and now my truck is a hole different beast! No more tire rub on my rear inner fender anymore and springs are straight and vertical instead at an angle, looks and works amazing. Thank you apoc industries!!

Alan Roitsch

Recently installed new Apoc control arms on my 2006 ram 2500 four-wheel drive and I'm pleased with the installation. The only issue that I have is that on the upper control arms I believe the rear Grease zerk should be installed on the bottom, as it is very difficult to get to with a top installation. I would advise getting the hardware kit just in case as I did have to cut my two lower control arm to axle bolts even after trying to get a ball joint press on them they would not come out

Stephen Cyr Jr

I’m satisfied with my purchase, took awhile to get but I called them to see what they issue was and they got right on it. Talked to them on a Monday and they said it would be shipped by Friday. Definitely made it happen. Thanks.

Frank Beal

Great control arms, 2nd set my family purchased for different vehicles. Was actually able to talk to a representative from apoc and realized that they are genuine people just trying to make a honest living. Will definitely be purchasing more products from them.

Casey Bruce

First thing these are American made parts and very high quality. The installation instructions where simple enough, but the service I got was amazing. Within 2 hours of ordering I received a phone call over a detail that I would have though was no big deal. I got shipping notification that same day( I ordered after their freight pick up time) and received the parts by the weekend so I could get them installed. This company really takes care of their customers. Could not be happier.

Brian Tippie

The product was delivered really quick and fit very well. Very pleased with the product, I would definitely buy again

Matthew Anderson

This is kind of a blanket review, but I just wanted to leave yall a quick note to say how awesome your company is! From ease of ordering, to the phone call from Bobby to verify my year model, to the fact that I took the free shipping option because I wasn't in a hurry, yet I received your product exactly 13 hours after the order was placed! Ya'll have earned a customer for life! Thanks again for the high quality products, awesome customer service, and quick shipping!

Kenneth Sund

Hope to install over the holidays

George Boothe

Top quality parts. Nice and beefy just what I needed for my 8000lb truck. Glad I saw them and ordered them. Thanks for making such a great product.

Keith Hanscom

Definitely recommended if you bought your truck lifted and don't know what size or brand kit was installed.

David Gruner

Best product for the price! They seem super durable and look great!

jonathan kramer

Awesome service, fast shipping and fit perfectly! Replaced my stock control arms!

Peter Castonguay

The upper and lower Adjustable Control Arms for my 2007.5 Dodge Ram 4X4 2500 Cummins were a perfect fit. I only wish that attachment bolts and nuts would have been offered as part of the package. Certainly not a deal breaker, but an important piece to completing the project. Overall, very good quality product.

James Siebert

I just got these in the mail this week, good quality welds and a good bushings. Have not had a chance to install them yet but im looking forward to using them in my truck!

brian bohannon

Been using stock control arms with lift and nice to be able to adjust these to get some adjustment back.

Shawn Andrews

Made the truck drive a lot better than before.

Unknown hoaglandjr.david

Nicely built, nice and heavy compared to originals

Great product, easy install and theyre measurments for the caster were spot on.. would definitely recommend them to everyone.

Michelle Welliver

They came on time

Jonathan Cassell

Purchased these control arms to replace my factory arms on my suspension wise Stock 06 2500 Cummins and have the option for a leveling/ lift kit later on. They look and feel much stronger than factory. They have a wide range of use (stock-6in of lift). Good instructions, even ended up with two spare grease zerks. Very good price. For my situation they are more than adequate as a plus they stiffened up the front end and improved the ride a little. If I had the need for something like this again I would come back. If I knew someone who could use them I would definitely recommend these guys.

Unknown dsmaliska

These are some of the nicest control arms and well built! Theres not 1 bad thing I can say about them and great instructions come with it. Shipping from them was super fast also! A++++++

Ryan Berryhill

These control arms in my opinion are the best on the market. Top notch workmanship. Great fitment approved the ride and handling of my truck 100%. Very clear detailed instructions. Will order from APOC again.

Tyler Metcalf

Suck a great quality product just put the control arm on my 03 Cummins and they look awesome I will definitely buy from them again

Joshua Holmes

It's cold outside and the truck don't fit in the garage so I haven't been able to put them on yet but as soon as I do I will let you know thanks they look good still in the package

John Laws

I haven’t got them put on yet but just by looking at them I can tell there built with pride!

Jordan Tidwell

Website was super easy to use, and I didn’t have to wait forever for my package.

Glen Schilling

Really high quality product. I love that fact that you can use them on a stock suspension set up. Also I replaced these to help cure my death wobble. On a side note when they first showed up one of the ends was wrong. It came with a 5 degree end and the application needs a 0 degree end. However, the guys overnighted me the correct end piece so I could take my truck on our trip the following Monday.

Dillon Mangiamele

I bought these for my 2008 dodge. Once I got them I looked them over and could tell that they are very good quality. They are a lot beefier than the stocks. I would recommend these all day. I got them installed on my truck and they look great.

Great reasons to buy from us:

Top Notch Customer service!
Need help! Give us a call or message us.
Lifetime Warranty
Lifetime warranty on all Apoc products.

ENTIÈREMENT RÉGLABLE DE LA HAUTEUR DU STOCK À 7 POUCES DE LEVAGE

Apoc Dodge Ram bras de contrôle réglables sont une grande mise à niveau du stock, les bras de contrôle d’usine fonctionnent très bien avec les pneus de taille usine et la suspension, mais une fois que vous allez plus grand, vous avez besoin de bras de contrôle plus forts et plus longs pour maintenir une manipulation correcte. Les bras de commande Apoc Dodge sont conçus pour maintenir une bonne géométrie de suspension et de direction afin de garder votre camion comme un stock, mais mieux. Lorsque vous ajoutez n’importe quelle quantité de levage à une Dodge Ram, vous changez vos angles de roulette qui peuvent créer des symptômes de direction dangereux et plus difficile de maintenir un suivi approprié des roues qui peut amener votre véhicule à se demander entre les lignes plus facile. Les gros pneus et les grands ascenseurs semblent grands mais ne sacrifient pas la manipulation et créent une bête pour maintenir sur la mise à niveau de route vous contrôlez le bras et conduisez avec facilité. Les bras réglables de contrôles sont entièrement réglables du stock tout le chemin à 7 » de levage, ainsi si votre juste commençant avec un ascenseur doux pour l’instant mais mise à niveau plus tard, ces bras adapteront à vos besoins pendant que vous ajoutez plus de levage au fil du temps.

Pièces incluses:

2 Bras de contrôle supérieurs
2 Bras de contrôle inférieurs
Buissons en polyuréthane de qualité supérieure
.250 Tube mural
Bushing Ends DOM Tubing
Utilise le matériel d’usine
Raccord de graisse pour chaque bushing pour la longue vie

Heure d’installation :

3-4 heures
Outils manuels de base
Jack et Jack se tient debout

Installer des instructions

Contrôle des longueurs de bras

Si vous êtes mise à niveau à partir des bras de contrôle de l’usine assurez-vous de définir la longueur à la taille de levage correcte pour garder votre géométrie de direction correcte. Plus l’ascenseur est grand, plus les bras de commande sont longs. Ne présumez pas quelle est la taille de votre ascenseur, si vous n’êtes pas sûr de contacter la fabrication du kit de levage pour vérifier la taille de votre ascenseur. Les instructions vous donneront les mesures pour régler chaque bras de commande pour correspondre à votre ascenseur, un alignement est recommandé après l’installation pour s’assurer que tous les angles d’alignement sont appropriés.