2000-2001 Dodge Ram 1500 Bras de commande réglables à dégagement élevé
Les bras haute dédouanement sont conçus pour réduire ou éliminer le frottement des pneus lors de l’exécution de pneus plus gros, les roues offset avec un kit de nivellement ou un kit de levage jusqu’à 6 " ascenseur. Si votre camion a problèmes de frottement alors ce sont la réponse pour vous.
Apoc Dodge Ram bras de contrôle réglables sont une grande mise à niveau du stock, les bras de contrôle d’usine fonctionnent très bien avec les pneus de taille usine et la suspension, mais une fois que vous allez plus grand, vous avez besoin de bras de contrôle plus forts et plus longs pour maintenir une manipulation correcte. Les bras de commande Apoc Dodge sont conçus pour maintenir une bonne géométrie de suspension et de direction afin de garder votre camion comme un stock, mais mieux. Lorsque vous ajoutez n’importe quelle quantité de levage à une Dodge Ram, vous changez vos angles de roulette qui peuvent créer des symptômes de direction dangereux et plus difficile de maintenir un suivi approprié des roues qui peut amener votre véhicule à se demander entre les lignes plus facile. Les gros pneus et les grands ascenseurs semblent grands mais ne sacrifient pas la manipulation et créent une bête pour maintenir sur la mise à niveau de route vous contrôlez le bras et conduisez avec facilité. Les bras réglables de contrôles sont entièrement réglables du stock tout le chemin à 7 » de levage, ainsi si votre juste commençant avec un ascenseur doux pour l’instant mais mise à niveau plus tard, ces bras adapteront à vos besoins pendant que vous ajoutez plus de levage au fil du temps.
Pièces incluses:
- 2 Bras de contrôle supérieurs
- 2 Bras de contrôle inférieurs
- Buissons en polyuréthane de qualité supérieure
- .250 Tube mural
- Bushing Ends DOM Tubing
- Utilise le matériel d’usine
- Raccord de graisse pour chaque bushing pour la longue vie
Heure d’installation :
- 3-4 heures
- Outils manuels de base
- Jack et Jack se tient debout
Contrôle des longueurs de bras
Si vous êtes mise à niveau à partir des bras de contrôle de l’usine assurez-vous de définir la longueur à la taille de levage correcte pour garder votre géométrie de direction correcte. Plus l’ascenseur est grand, plus les bras de commande sont longs. Ne présumez pas quelle est la taille de votre ascenseur, si vous n’êtes pas sûr de contacter la fabrication du kit de levage pour vérifier la taille de votre ascenseur. Les instructions vous donneront les mesures pour régler chaque bras de commande pour correspondre à votre ascenseur, un alignement est recommandé après l’installation pour s’assurer que tous les angles d’alignement sont appropriés.
Built Right. Backed Right.
Our crew’s on call Monday–Friday, 9–5 EST. Hit us up at 865-983-5004 — real support, done right.
Product specifications
Fits factory brackets, no cutting required
Stock height upto 6" lift
PTMEG Polyurethane 91 Durometer
Yes, adjustable from stock to +2.5".
3/16" Thick steel
Powder Coated Satin Black
Strength. Adjustability. Confidence.
Dodge Control Arm asse
Built for Your Ram
What all comes with a Dodge control arm kits?
Complete Kit – Ready to Install:
Each kit comes as a full set of four control arms — including two upper arms and two lower arms — fully assembled and ready for installation. You can reuse your factory hardware for mounting, or upgrade to new hardware if it is included or added to your order. Our goal is to make your installation as smooth and hassle-free as possible.
Premium Bushings – Built for Life:
Apoc Industries backs our bushings with a Lifetime Warranty for lasting confidence. We use only the highest quality polyurethane (PTMEG-based) in all Apoc products.
PTMEG polyurethane offers superior articulation and a firmer, more responsive feel — without the harshness commonly found in solid joints like heims or flex joints.
These bushings are ideal for daily driving while providing excellent durability and performance for moderate off-road use.
Adjustable Length for Precise Handling:
Apoc control arm kits are designed with flexibility in mind. They are stock length when fully collapsed and up to 2.5 inches longer when fully extended, giving you plenty of adjustability to fine-tune your truck’s suspension geometry and handling. Whether you’re leveling, lifting, or optimizing alignment, our arms provide the range needed for a perfect setup.
100%
Red, White & Built Right
Lifetime Warranty Polyurethane Bushings
Built to Last, Easy to Rebuild
Apoc Industries' high-performance polyurethane bushings are backed by a lifetime warranty and engineered for durability you can count on. Easily rebuildable with basic tools, they deliver a firm, responsive ride without the hassle—made for daily drivers and built for the long haul.
Before
After
FAQ'S
Dodge Adjustable control Arms
Our customer support is available Monday to Friday: 9am-5pm EST. 865-983-5004
Yes, adjusting caster absolutely helps on a leveled truck.
When you level a truck — even by just 1–3 inches — you're altering the front suspension geometry. This often reduces the factory caster angle, which can lead to issues like wandering, loose steering feel, or uneven tire wear. Restoring or slightly increasing caster after leveling improves steering stability, road tracking, and overall handling.
In many cases, trucks that are leveled benefit from:
- Caster correction bolts or cams
- Adjustable upper or lower control arms(especially on solid axle trucks)
- Professional alignment with attention to caster settings
Bottom line: Even a mild leveling kit can throw off alignment specs enough that caster correction is worth addressing — especially if you want the truck to feel planted and drive straight.
At Apoc Industries, we understand that every suspension change impacts your vehicle’s geometry. That’s why we provide detailed installation instructions, including caster correction measurements tailored to a variety of lift and leveling heights. Whether you’re adding a small leveling kit or a full suspension lift, our guides ensure you have the correct specifications to dial in your alignment for maximum drivability, tire life, and performance.
Taking the guesswork out of your setup means better results — and a better ride..
Yes, you can continue using your factory alignment bolt. Its eccentric design allows for easy fine-tuning of caster angles once the control arms are set to the correct length. This ensures a smooth and precise alignment process, whether you’re adjusting it yourself or having it dialed in by a professional shop.
Our components are engineered to work seamlessly with your existing hardware, saving you time and keeping installation straightforward.
For PTMEG (polytetramethylene ether glycol) polyurethane bushings, the best grease is a silicone-based lubricant with PTFE (polytetrafluoroethylene) additives. Here’s why and what to consider:
Why Silicone-Based with PTFE?
: PTMEG polyurethane is resistant to petroleum-based products, but silicone-based grease is preferred as it won’t degrade the material and is explicitly recommended for polyurethane bushings.Tackiness
: PTFE additives lower the coefficient of friction and are waterproof, ensuring long-lasting lubrication and quiet operation.
: Silicone-based grease repels water, protecting bushings from corrosion and maintaining performance in wet conditions.
Lifetime Warranty
Custom Polyurethane Bushings
Built for performance and practicality, our custom polyurethane bushings deliver a firmer, more responsive suspension feel while still allowing enough flex for a comfortable ride. Designed with DIY rebuilds in mind, these bushings can be easily serviced at home using basic hand tools—no press required. Durable, reliable, and user-friendly, they’re made to enhance handling and stand up to long-term use without sacrificing everyday drivability.
Serviceable 1/4"-28 Grease Zerks for Easy Maintenance
Our bushings are equipped with 1/4"-28 grease zerks for easy maintenance and long service life. These fittings are a common size, making them easy to service or replace with standard parts from any auto parts store. Designed for convenience, they allow quick re-greasing without disassembly to keep your suspension performing at its best.
Presicion Fit
Instead of using a one-size-fits-all approach, Apoc meticulously machines each arm to fit individual vehicles using precise tolerances and factory specifications. This guarantees a perfect and lasting fit, unlike other companies that rely on shims and generic components. Trust the expertise and quality of Apoc for your vehicle's needs.
Extra Thick tubing
Apoc opts for thick wall tubing, which is significantly stronger than stock and one of the toughest on the market.