Ford F-250 Super Duty Leveling Kits: Lift, Clear 35s, and Build It Right

Leveling Kits 101: Lift Your Ford F-250 Super Duty the Right Way

Your Ford F-250 Super Duty was built to work hard — but that factory nose-down rake? Not doing you any favors. APOC Industries' Ford F-250 leveling kits fix that fast. Bolt on a 2–3" front lift, clear 35" tires, and give your Super Duty the aggressive, level stance it should have rolled off the line with. No fluff. No guesswork. Just a better truck.

→ Browse F-250 Leveling Kits

What Is a Leveling Kit — and Why Does It Matter?

A leveling kit raises the front of your F-250 by 1.5–3", eliminating the factory rake that drops the nose below the rear. Unlike a full Super Duty lift kit — which can run 4–6"+ and require extensive mods — a leveling kit is a straightforward, cost-effective upgrade that keeps your ride close to stock while delivering real results:

35" tire clearance without rubbing
Improved approach angles for off-road terrain
Level, aggressive stance that looks purpose-built
Better towing balance under heavy loads

Most builds are done in under 2 hours. Seriously.

APOC Leveling Kits — Built for Super Duty, Not Compromise

We engineer our kits for the 2017–2026 Ford F-250 Super Duty 4WD — CNC-machined from billet aluminum or high-strength steel depending on the application. Every kit is:

Made in USA — no offshore castings, no quality surprises
Bolt-on compatible with factory shocks (or upgrade to Fox or Bilstein for max performance)
Fitment-specific — dialed in for 2–3" front lifts with zero guesswork
Proven in the field — by daily drivers and serious off-road builds alike

How to Install Your F-250 Leveling Kit

Gather your tools — floor jack, jack stands, basic hand tools, torque wrench
Remove the front wheels — support the lower control arm, disconnect the strut
Install the spacer — seat it above or below the strut per kit instructions
Reassemble and torque — follow the spec sheet included with your kit
Get an alignment — always. Especially if you're running past 2".

Pro tip: Going beyond 2"? Pair your leveling kit with APOC's radius arms or a 4-link setup to correct caster geometry and protect your front-end components long-term.

Build It Right — Recommended Combos

A leveling kit is the starting point. Here's how serious builders complete the package:

Fox 2.0 Performance Shocks — matched to your lift height for maximum off-road performance
Bilstein 5100 Front Shocks — proven OE-replacement upgrade with adjustable ride height, ideal for daily-driven Super Dutys
Bilstein 5160 Front Shocks — remote reservoir performance for builds pushing 2–2.5" of lift and hitting the trails
Radius Arms & 4-Links — the next step for serious lift builds; correct caster, extend suspension travel, and handle the geometry demands of bigger lifts

Fitment

Our F-250 leveling kits are engineered specifically for the 2017–2026 Ford F-250 Super Duty 4WD. Running an older model or a different configuration? Contact us — we'll confirm fitment and point you to the right kit.

Stop Driving a Nose-Down Truck

Your F-250 deserves better than the factory setup. APOC's leveling kits deliver the stance, clearance, and confidence your Super Duty was built for — without the cost or complexity of a full lift. Shop now and build it right.